Step One: Get Your Cleaning Materials and Chemicals
Strangely, the first product you require is an easy one; A bucket. A five-gallon pail would work well. If you don't have one you can get one from your local hardware shop or retail giant. Then you need some bleach. This can be in the form of a liquid or a powder cleaner. (There is likewise services such as Simple Green's House and Siding Cleaner available in the house improvement stores.) Lastly, you require a scrubby of sorts. A sponge with a rough side will work nicely. It may not be smart to use a steel wool pad as that can take the paint completely off your garage door. You can likewise utilize a semi-soft brush with a handle, which may be a little simpler. Also, be sure to use a pair of gloves, either leather or latex.
Step Two: Preparation Work
When you have all of garage doors your garage door cleaning materials, fill the (5 gallon) container up halfway and put those gloves on. Then gather about half a cup of bleach. That may seem like a percentage however it is essential not to overdo it with the bleach. Naturally, if you are not comfortable using bleach, there are a couple of alternatives. Dish soap will work, just not too. Multi-purpose cleaner (without bleach) also works, but once again, not also.
Step Three: All Set Set Clean!
Now you are all set to clean up that garage door! Make sure you get every panel and every fracture and crevice. It is normally better to do the top very first and work your way over from one side to the other. Then you can do the same thing for the bottom. Make certain to put some elbow grease into it and get any areas of mold or mildew off. When the garage door is entirely scrubbed down, you can wash it off with the hose pipe or just by filling the bucket a couple of times. As always, if you have any questions or discover you need some garage door repair services, simply call a Los Angeles garage door repair expert!